The Meijifocus 360-degree wood fireplace on its round pedestal, split-wood fire alive in the full glass ring, slim flue rising

Meijifocus

Sit around the fire.

Wood or gas  ·  5.0 on Google  ·  WETT-certified installs

Focus · Dominique Imbert, 1993

The fireplace you sit around.

“S’asseoir autour d’un feu, c’est être humain” — to sit around a fire is to be human. It burns wood, or gas with a remote in your hand — the same sculpture either way.

I

The 360° glass ring

“360° fireplace with sliding glass panels,” says the brochure — a full cylinder of glass on a round pedestal, the fire visible from every chair in the room.

II

A hood spun from steel

A wide matte-black conical hood over an 865 mm ring — 3 mm steel, drawn to a slim flue that runs clean to the ceiling.

III

Wood now — gas certified too

The manual certifies this body for wood or a gas burner compliant with ANSI Z21.60 at 65,000 BTU/hr or less. One sculpture, two lives.

The Meijifocus glass ring head-on, split-wood fire inside
The glass ring · 360°
Split hardwood and embers seen close through the Meijifocus glass
Hardwood · through the glass
A dark lounge arranged in a circle around the Meijifocus, fire the only light
Seats around it · by design

Photography: Focus

Seen in real rooms.

From the maker’s own book — the Meijifocus, wood and gas, in rooms people actually live in. Tap a room to step inside.

The lantern at the ocean corner
Under the spiral stair
On dark timber
The lantern, on gas
Above the ocean
In the long room
The other end of the room

Will it fit?

Made to stand in the middle.

The Meijifocus Wood straight on, fire in the ring
hood 56⅞″ tall 34 1/16″ across
20,473BTU/hr output, wood (listing)
51.8%efficiency, wood (listing)
26″glass-to-wall clearance (manual)
9 ftceiling minimum (274 cm)

The maker’s numbers

Specifications

The wood numbers below. On gas, the same body runs 27,000–42,000 BTU/hr of natural gas (27,000–43,500 on propane) through its ANSI Z21.60-certified burner, with flame adjustment, remote control and electronic ignition — the gas line runs up through the base.

20,473 BTU/hr (6 kW)Heat output · listing
9 ft (274 cm)Ceiling minimum
34 1/16″ (865 mm)Diameter

The fire

Fuel
wood · natural draft
Output (listing)
20,473 BTU/hr (6 kW)
Efficiency (listing)
51.8%
CO (listing)
0.08%
Dual-fuel (manual)
wood, or ANSI Z21.60 gas burner ≤65,000 BTU/hr

The sculpture

Steel
3 mm, matte black
Glass
sliding panels, full 360°
Diameter
34 1/16″ (865 mm)
Visible opening
865 mm dia × 419 mm h
Hood height (manual)
56⅞″ (1445 mm)
Weights (manual)
hood 64 kg · base 44 kg · plate 66 kg

The room

Clearance (manual)
glass to walls 26″ (660 mm)
Floor protection (manual)
R≥0.6 · 16″ US / 18″ Canada radius · base 16″ up

The chimney

Ceiling minimum
9 ft (274 cm)
Chimney
8″ class-A: UL 103HT · ULC S629

The fine print

EPA
exempt, 40 CFR 60.531 (manual)
Certification
UL 737-2011 · ULC-S627-00

These are the numbers we install to — every number above is Focus’s own published figure, nothing rounded by us, nothing guessed. We’re an authorized Focus dealer — the maker’s own locator lists our Coldwater showroom, with an Ergofocus Holographik hanging on display. See the maker’s own Meijifocus Bois page — brochure and manual on hand at the showroom.

The Focus family

Nine sculptures, one house.

Real voices · 5.0 on Google

Installed by the crew people write about.

“…the knowledge and guidance we received in determining size, location and finishing design was invaluable.”

Phil M. · Google review

“As someone extremely particular and fussy I was very pleased.”

Josh R. · Google review

Quick answers

The three things everyone asks.

Will it fit my room?

The glass wants 26″ to the nearest wall, the ceiling wants 9 ft (274 cm), and the floor wants non-combustible protection (R≥0.6) in a 16″ radius from the glass in the US — 18″ in Canada — with the base at least 16″ above combustible flooring. Send us a photo of your room and we’ll confirm placement before you spend a dollar.

Can the same sculpture burn gas?

Yes — by the manual itself: this body is certified for wood or a gas burner compliant with ANSI Z21.60 at 65,000 BTU/hr or less. If you’d rather it be born on gas, we order it factory-dressed with the certified burner — remote in hand, same sculpture.

Who installs it?

A WETT-certified crew — ours. A centre-of-room fireplace is a plumb-line job on an 8″ class-A chimney, so we treat the maker’s millimetres as law — and your annual sweep is one call to us.

What it costs

Priced to your home — not from a chart.

Every wall is different — framing, venting, gas line — so your price is real, not a guess.

Tell us about your wall

Two minutes online. Photos help; the booking machine takes them.

Get your real quote

Dan prices your exact install and walks you through every line of it.

Installed by the pros

Nick’s crew frames it to the maker’s spec, runs the venting, and leaves the room clean.

Request 2026 pricing

Or come see it in our Coldwater showroom — the espresso will be on.

Beyond the sculptures

If this one isn’t yours.